Quadcopters – Revolutionary film tool or headache?

With the battery hooked up and one last check that all the wires are tucked away and nothing is obstructing the props, I arm the quad copter and give the left stick a poke. The props spin up and everything looks good. The weather forecast showed winds of only 8kph for this morning so it seemed ideal to test out the quad with the gimbal and gopro attached. I’d flown a few times but not with the gopro on board, so the nerves were running a little high with a relatively expensive camera serving as collateral.

The quad leaps up about 2m and I try to keep it in place with the right stick. Straight away I notice that the quad is not in self levelling mode and I switching it to the more forgiving mode. It’s a bit happier but I can tell there is a bit more wind than I expected and I’m having to work a little harder than I wanted to keep it in control.

One of the problems with flying a symmetrical aircraft is that it can be difficult to keep track of which side is the front. As a result if the wind blows it in one direction you need to counter it by pitching into the wind, but obviously if you’re not sure which side is the front you’re not sure which way to pitch it. What I find helps here is to fly it with constant forward momentum, then if you turn it left or right it’s easier to keep track of which side is the front.

After flying around a bit I decide to climb a bit. One of the features of the new gimbal is that I can tilt the camera in different directions, so I’d like to try it out by flying it higher and tilting the camera straight down. Once I reach a height of around 20m I take my hand off the left stick to control the camera gimbal. And in a brief second or two the quad rotates. It’s surprising how quickly you can lose orientation of the quad, especially when it is further away from you. With the wind blowing it further away from me and me being uncertain which side is the front I decide I need to descend. You don’t want to descend too fast otherwise you can descend into your own prop wash which can cause the props to stall.  As it’s coming down it looks like it’s going to land in the field that I’m flying in, but as It gets about 5m off the ground I realise it’s just passed the fence line and heading into the road ($%*#). I give it throttle to try and bring it up but it’s too late it’s behind a tree, I loose visual and I hear it crash… bugger

I rush over to the crash site, jump a fence and rip my trousers. Do you know what’s worse than arriving and seeing your quad copter in pieces? It’s arriving, seeing your quad copter in pieces and then watching a car drive over the remains of your brand new camera gimbal. I quickly collect up the pieces out of the road and evaluate the damage. It doesn’t look good. In that moment I can’t help but feel heart ache as I see my time and money getting wasted.

You might have noticed recently that more and more people are getting excited about the prospect of getting aerial video footage from radio controlled multirotors. At first I liked the thought but thought it would be far too impractical for our project. As I began to do research I found one or two gopro carrying multirotors that where sold as foldable, portable airframes which got me wondering. I almost put my money down on something called a Pocket Drone but I’m glad I didn’t. As I got more immersed in the hobby, I began to realise that if I built a custom quad copter I could get something tailored to my requirements and probably actually save some money in the process. It also has the benefit that if I put it together then I should be able to fix it if it gets broken.

10933917_10153047527615681_2028401977526990057_n 10308303_10153047527790681_2601880479175073725_n10731084_10153056401045681_1126698834481161388_n


So here’s where I stand. My quadcopter has 1 broken arm, a broken leg, the frame is broken in a couple of key places, one of the four speed controllers is broken and the camera gimbal is a write off. Luckily the gopro escaped with just a crack, but otherwise still working. So it seems the real question is whether we can afford ongoing repairs. This quad is not a toy, it’s a tool and its cost needs to be evaluated against the value it brings to our film. In its favour, we’re hoping that it will be useful in some infomercials that we plan on shooting whiles working on our film, to supplement our finances. I had also planned one or two episodes of NarrowTV based around this film tool. I suppose then, that one of those NarrowTV episodes will need to be about rebuilding the quadcopter. Make sure you subscribe to NarrowTV if it catches your interest!


Promotional video – Behind the Scenes

I felt both a little tired and expectant while watching the sunrise over the Al Azhar Masjid in District Six. Four thirty AM is an early start by any standards, and even more so since I had spent the previous evening at a friend’s pre-wedding party. Still I felt excited about the day ahead.

It is as a result of this friend’s wedding that Jeff and I found ourselves in Cape Town for a week from 4 – 10 January. It was set up to be a busy week with me being a brides maid and all kinds of planned pre-wedding activities but still Jeff and I felt this is the perfect opportunity for us to get the footage we want for the promotional video for our upcoming film “A Narrow Path”.

A Narrow Path is our brain child dreamt up in 2014. We intend to start shooting the film looking at Christian/Muslim interactions full time in March. In order to build some momentum and garner interest in our project we wanted to create an interesting and exciting promotional piece.



January 6 is the day that Jeff and I set aside to shoot some additional shots for the promotional video. These shots were to supplement the content shot in studio on January 7. We had done our foot work. A script was written and the scene plans were written. However, after the effort of getting the sunrise shot over the mosque things fell apart.

We were tired, struggling to find appropriate locations and things just did not feel right. With emotions running high and frustration starting to emerge we eventually decided to call it quits and try again when fresh.

The studio was next. We arrived there the next morning with fresh energy and a new game plan. After spending an hour rescripting and planning the shoot we were ready to start. With fresh ideas and a much simpler script we were feeling inspired and energised. I have never been in a studio before. It was much fun taking photographs, playing around with different ideas and finally filming the interviews with each other.

I still feel a little uncomfortable in front of the camera but spending this time in a relaxed atmosphere with Jeff went a long way to settle my nerves. We left the studio feeling very satisfied with our morning and without the need of shooting any more content. All in all very satisfying. Cannot wait to see the edit… Jeff?